PROFESSIONAL AUDIO-VIDEO CABLE	Technical Data sheet

APPLICATIONS

Professional audio-video cable PPAV-06 3x0.45/2.0 is intended for connection of computer video signal (RGB, vertical and horizontal sync signal) via interfaces and switches, for monitor displays and projectors.

The cable is designed to offer small weight and small outer diameter, combined with very good video signal parameters transmitted through the cable.

To achieve high analogue or digital data transmission performance the cable is protected against external

electromagnetic interferences by an overall electrostatic shield.

Halogen free cable, applied when higher safety in case of fire is required. The cable is flame retardant, its smoke emission in fire is low and released gases are not corrosive.

The cables are suitable for indoor installations connecting fixed and movable equipment.

CONSTRUCTION

-  flexible, multiwire conductors, stranded of tin-plated copper wires (7x0.15 mm),

-  foam-skin polyethylene insulation,

-  individual shield incorporating aluminium-polyester tape under copper wire lapping,

-  sheath of shielded wires made of halogen free compound (HFFR),

-  colours of sheath: red, green, blue,

-  sheath diameter: 2.7±0.1 mm,

-  three mini-coaxial laid-up into cable core,

-  overall electrostatic shield incorporating aluminium-polyester tape and stranded annealed tinned copper drain wire,

-  cable sheath made of halogen free compound, grey RAL 7001, other colours also available.

CHARACTERISTICS

Characteristic impedance           75 ± 3 Ω

Mutual capacitance at 1 kHz    58 ± 3 nF/km

Operating voltage, max.    150 V

Voltage test    700 V rms

DC conductor resistance at 20°C, max     160 Ω/km

Velocity of propagation                78 %

Operating temperature range

      for fixed installation             from -20 to + 70 °C
      for movable installation        from    0 to + 50 °C

Corrosivity of emitted gases per       PN-EN 60754-1, PN-EN 60754-2, IEC 60754-2

         pH appr.                             6.8

         conductivity appr.                 0.4 µS/mm

Smoke density                              PN-EN 61034-2, IEC 61034-2

 minimum light transmittance          70 %

Minimum bending radius                10 cable diameter

Cable combustibility                      flame retardant

Combustibility tests                      PN-EN 60332-1-2, IEC 60332-1-2

Attenuation loss, maximum

The cable meets requirements of the low voltage directive 2014/35/EU

TECHNOKABEL S.A. reserves the right to change specifications without prior notice.