| CABLES FOR ALARM AND SECURITY SYSTEMS | Technical Data sheet |
|
|
|
 |
APPLICATIONS
P-CAB 4/TP/50 and P-CAB 4/TP/75 are multipair, pair individually shielded cables intended for BUS type systems. Also suitable for access control and CCTV systems.
Shielded pair structure substantially decreases mutual influence between signals transmitted along the cable.
The cables are suitable for fixed indoor installations.
CONSTRUCTION
- flexible, multiwire conductors, stranded of bare annealed copper wires (tin-plated on request), meeting requirements of class 5 per PN-EN 60228,
- PVC insulation - identification colour code: pair 1. black and red, pair 2 white and yellow,
- pair shields incorporating aluminium-polyester tape and multiwire annealed tinned copper drain wire, cross-section 0.22 mm2,
- shielded pairs laid-up into cable core,
- PVC cable sheath, white RAL 9010, other colours also available.
CHARACTERISTICS
|
Conductor cross-section |
mm2 |
0.50 |
0.75 |
|
DC conductor resistance at 20°C, maximum |
Ω/km |
39.0 |
26.0 |
|
Voltage test |
V rms |
1500 |
1500 |
|
Mutual capacitance at 1 kHz, approximate |
nF/km |
170 |
180 |
|
Operating voltage Insulation resistance, minimum
|
150 V 200 MΩ·km
|
Operating temperature range during operation during installation Minimum bending radius Cable combustibility Combustibility tests Reference standards |
from - 30 to + 70°C from - 10 to + 50°C 10 x cable diameter flame retardant PN-EN 60332-1-2, IEC 60332-1-2 BS 4737 sec.3.30 |
The cable meets requirements of the low voltage directive 2014/35/EU
Other cross-sections and pair counts available on request.
TECHNOKABEL S.A. reserves the right to change specifications without prior notice.